Sakura86Style

Sakur86Style 1:43 Full-Scale RC Drift Car – Toyota AE86 Trueno / Veilside Mazda RX-7

Legendary JDM Performance, Reimagined for Your Desktop

Two of the most iconic Japanese street machines — the Toyota AE86 Trueno and the Veilside Mazda RX-7 — are now available in high-performance 1:43 scale RC form. Built for real mini drifting action, these micro machines are packed with features you'd expect from full-size hobby-grade RC cars. Whether you're sliding around a DIY track or racing a friend, these cars deliver precision control, customizability, and real driving excitement in a compact package.

Key Features

• Precision Proportional Steering & Throttle – Smooth, responsive control for precise cornering and acceleration.

• 3-Stage Power Modes (20%, 50%, 100%) – Start as a beginner and unlock expert speed as your skills grow.

• 4-Wheel Drive Drivetrain – Superior traction and stability for controlled drifting and corner exits.

• Powerful Hollow Cup Motor – Delivers punchy acceleration and strong torque in a compact, efficient design.

• Built-In Bearings – Reduces friction and improves efficiency for longer, smoother runs.

• New Upgraded Throttle Curve – Enhanced control over low- and mid-speed performance for tight drift control.

• Crash-Resistant Construction – Lightweight and durable plastic shell built to handle real-world bumps and slides.

• Replaceable Drift/Grip Tire Setup – Easily swap tires to match your driving style and surface type.

• Headlights & Taillights with Hazard Mode – Switchable on/off lights via the controller, with a hazard light function for added realism.

• Steering Trim Adjustment – Fine-tune your car’s steering for perfectly straight runs.

• USB Charging & High-Rate Lithium Battery – Fast charging and long run time with the included 3.7V 200mAh rechargeable lithium battery.

• Multiplayer Ready – Race up to 4 cars at once with interference-free 2.4GHz control.

• Compact, Collectible Size – Each car measures 11cm long, 4cm wide, and 3cm tall, perfect for home tracks or desktop drifting.

• 30 Minutes of Drive Time – Get more action per charge with fast 30-minute recharging.

• Remote Range of 20 Meters – Long-distance control with precision handling and no signal dropout.

• Bonus Accessories Included – Comes with 8 road cones to set up your own custom drift course out of the box.

Battery & Charging Info

• Built-in 3.7V 200mAh rechargeable lithium battery (car)

• Remote requires 4× AAA batteries (not included)

• USB charging cable included

Experience next-level RC drifting with realism, precision, and style. Whether you choose the timeless AE86 Trueno or the aggressive Veilside RX-7, these micro drift cars offer serious performance and head-turning looks in one unbeatable package.

Take control. Set up your course. Start Drifting

Enhance Your Music Experience with the Sakura86Style's Beat Buddy Audio Visualizer!

This device transforms your audio into a stunning light show, syncing perfectly with the rhythm and beats of your music. Perfect for cars, home audio systems, or even as a unique decorative piece on your desk!

Key Features:

• Real time music visualization: The LED lights react to the sound frequencies, creating a mesmerizing spectrum display that moves in sync with your music.
• 10 Adjustable Sensitivity Levels: Customize the responsiveness of the lights to match the volume and intensity of your audio.
• Vibrant LED Lights: Enjoy a dynamic light show with bright, energy-efficient LEDs that enhance any environment.
• Compact & Easy to Install: Designed for versatility, this device can be used in cars, home audio setups, or as a standalone decorative piece.
• Built-in Microphone: The integrated microphone picks up sound effortlessly, ensuring accurate and responsive light synchronization.

Whether you're cruising in your car or simply enjoying your favorite tunes at home, the Sakura86Style Beat Buddy adds a fun and immersive element to your music experience.

How to operate:

1. Single Click

UP - Mode Change

OK - Fixed display frequency indication/only display frequency indication when there is a signal.

DOWN - Mode Change

2. Double Click

UP - Normal mode/Upside Down mode

OK - Real output / Smooth output

DOWN - Norma mode/Inverted color mode

3. Three Clicks

UP - Noise filtering function
(Note: There is a different noise in ambient. The principle of this function is to filter the background noise in the ambient, and then the sound larger than the ambient noise will be recognized. Before doing this noise calibration, make sure that the ambient sound is quiet and stable. It is recommended to do a calibration if the use occasion Changes.)(In 3.5"audio wired input mode, please ensure that no music is played when performing this function to ensure that the noise is eliminated)

OK - Switch 3.5" audio wired input and sound-controlled (default setting is sound-controlled)

DOWN - The one-click noise filtering function is turned off.

4. Four Clicks

OK - Enter the gain selection setting AGC/-20dB/-15dB/-10dB/-5dB/OdB (After entering mode, switch through the UP/DOWN key, default setting is AGC)

DOWN - Enter the amplification curve settings (5 modes After entering the mode setting, switch through the UP/DOWN.

5. Five Clicks

OK - Enter the following 3 modes (after entering the mode, switch through the UP/DOWN key)
1. Automatic mode(AUTO)(display spectrum when receiving audio signal, Entering standby mode in 30 seconds when there is no signal) (default setting)
2.Auto off mode(AUTO OF)(display spectrum when receiving audio signal, auto off in 30 seconds when there is no audio signal.
3.Music mode(AUDIO)(spectrum status is always displayed)

6. Six Clicks

OK - Enter setting mode of speed

7. Seven Clicks

UP+Down+OK -2 Seconds, Enter the screen self-test program, press the OK button 2 seconds to exit.

8. Eights Clicks

UP - Brightness increase(Brightness can be adjusted 8 levels, Default is the level 5)

OK - 1 second to enter standby mode. 3 seconds switch it off. In standby or shutdown mode it waked up by pressing the OK button. (Pressing the UP/DOWN key is invalid),powering on again after power failure it will automatically release the standby/shutdown status.

DOWN - Brightness reduction

Speed Setting Mode: (In normal mode, click the OK button 6 times to enter, Press and hold the OK button for 2 seconds or do not operate
for 5 seconds to exit)

UP - Time increases, Speed decreases

OK - 1.The falling speed of the light bar (15 optional)
2. The holding time of the peak (15 optional).
3. The falling speed of the peak (15 optional)
4. Output selection (Real output / smooth output)
Loop in these functions

DOWN - Time decreases, Speed increase\

Factory Reset/Default Settings

UP+Down for 10 seconds.

What's Included?

1x Sakura86Style Beat Buddy Audio Visualizer Screen

1x Type-C to USB cable

1x Aux Cable

1x Aux Audio Splitter

screen size - 50mm (5cm) high 110mm (11cm) wide

Introducing Pixel Panels, the revolutionary window panel lighting system, perfect for making an unforgettable statement in your vehicle. Combining USB-powered comfort with a sophisticated app boasting 1000's of preloaded images and gifs, you can customize your car's look with the utmost ease.

Easily establish a Bluetooth connection with your Apple or Android device through the dedicated App to access a host of exciting features. Enjoy the freedom of Free-draw and Free-text display, effortlessly upload your personal images or GIFs, or explore an extensive online library brimming with a multitude of user-generated GIFs. Embrace unparalleled customization that knows no bounds, right at your fingertips.

Experience the versatility of our Custom Sakura86Style LED panels, which can be effortlessly repositioned numerous times and require no complex installation process. Just plug the USB into a power source, download the app, and you're all set to embark on a lighting journey. Plus, we include spare 3M Tape for your convenience, allowing you to apply the screen multiple times with ease.

⚪️ Plug and play (USB)

⚪️ Supplied 3M Super Adhesive Tape 

⚪️ 3 meters cable length

⚪️ 12v accessories plug for USB included

Display screen size - 18cm x 9cm (180mm x 90mm)

Introducing Pixel Panels, the revolutionary window panel lighting system, perfect for making an unforgettable statement in your vehicle. Combining USB-powered comfort with a sophisticated app boasting 1000's of preloaded images and gifs, you can customize your car's look with the utmost ease.

Easily establish a Bluetooth connection with your Apple or Android device through the dedicated App to access a host of exciting features. Enjoy the freedom of Free-draw and Free-text display, effortlessly upload your personal images or GIFs, or explore an extensive online library brimming with a multitude of user-generated GIFs. Embrace unparalleled customization that knows no bounds, right at your fingertips.

Experience the versatility of our Custom Sakura86Style LED panels, which can be effortlessly repositioned numerous times and require no complex installation process. Just plug the USB into a power source, download the app, and you're all set to embark on a lighting journey. Plus, we include spare 3M Tape for your convenience, allowing you to apply the screen multiple times with ease.

⚪️ Plug and play (USB)

⚪️ Supplied 3M Super Adhesive Tape 

⚪️ 5 meters cable length

⚪️ 12v accessories plug for USB included

Display screen size - 38cm x 10cm (380mm x 100mm)

These cherry blossoms or JDM Drift Charms are frequently suspended beneath Japanese street and drift cars. Originally taken from Japanese trains, they became symbolic, and these replicas mimic those hangers. They're incredibly simple to attach, boasting a universal fit. Effortlessly infuse your car with Japanese flair and style!

1x Cherry Blossom.

Total length: 27cm/ 10.6”

Ring material: PVC

Strap material: Plastic / Nylon